1 Kg/ Spool 1.75mm PLA Filament for 3D Printer with Colorful Color
PLA (Polylactic acid) is thermoplastic aliphatic polyester made of renewable resources like corn or starch. Its extrusion-temperature is much lower than ABS, and most often doesn’t require a heated bed. It has the following characteristics:
Good toughness high strength, high stiffness ;
No block nozzle, good stick hot bed, a smooth PLA used
Can be processed at 185 degrees
Low shrinkage, thermoforming dimensional stability
Key Specifications/Special Features
Characteristics:
PLA can be processed in low temperature
PLA with 3mm can be processed in 185
PLA tastes like fried corn
With high intensity and stiffness, PLA can print structure parts of 3D printer for DIY users
PLA enjoys excellent formability, low thermal denaturation and only 0.3% shrinkage, making firm adhesion between layers
PLA has bright colors and can be made semi-transparent
PLA, as an environment biomaterial is extracted from corn
Have good surface gloss and smoothness
Sends out noodors in processing
PLA can avoid curling and warping in printing
PLA Filament Available color
| Black | Transp Blue | Brown | Transp Yellow | Transp Red |
| Gold | Transp Green | Grey | Natural | Transparent |
| Transp Orange | Pink | Transp Purple | Silver | White |
| Blue | Dark Blue | Light Blue | Yellow | Purple |
| Orange | Green | Red | Light Green | Dark Orange |
| Dark Red | Dark Yellow | Dark Green | Skin | Coffee |
| Glow in Dark Blue | Glow in Dark Green | Glow in Dark Yellow | Soft White | Soft Black
|
Quality control:
| 1. All of our materials are 100% new and certified by latest REACH.. |
| 2. Before the filaments producing, we will dry the material for 4-8 hours to make sure them in a very good condition. |
| 3. The Laser diameter runs automatically to control the diameter of the filaments and keeps it in a right range of 1.75/3.0mm, and our engineer will adjust it immediately when alarms to indicate of wrong size, and this unqualified filament will be not use. |
| 4. Tolerance roundness +/-0.02mm. each spool net weight 1kg |
| 5. Before the mass production, our engineer always do the test to make sure that each batch of new raw materials must be printed by Markbot or Reprap 3D printer. |
| 6. we put all filament spool in shelf, different kind in different shelf, all categories arranged orderly. |
| 7. In order to match the same products, we will attach the identification label to the packing box for each roll of filament, and the different ones also will be classified in different pallets. |
Product Tags:
|
|
1 Kg / Spool 1.75 Mm 3D Printer Filament Colorful Low Shrinkage For FDM 3D Printer Images
|
